WellPD wearable LED Guide

The LED on your WellPD wearable provides quick information about the device’s status. To check the current condition at any time, press the button once — the LED will show the status immediately. Note that for critical issues, the LED may also blink automatically without pressing the button.

Please note that the LED is normally turned off to preserve battery life — this does not indicate any issue.

Below is a guide to help you understand what each LED color and pattern means.

🟢 Green LED – Everything Is OK
	👀 Behavior: Green LED turns on 💡 Meaning: The WellPD wearable is functioning correctly. The device is connected, recording data, and no issues are detected.

🟢 Green LED – Everything Is OK

The WellPD wearable with its LED lit green

👀 Behavior: Green LED turns on

💡 Meaning: The WellPD wearable is functioning correctly. The device is connected, recording data, and no issues are detected.

🟠 Orange LED (gentle blinking) – Battery Low
	👀 Behavior: Orange LED blinks gently 💡 Meaning: The battery is low. Please charge the WellPD wearable as soon as possible. This notification appears when the device reaches approximately 5% battery level. On a full charge, the battery can last up to 14 days, depending on usage.

🟠 Orange LED (gentle blinking) – Battery Low

The WellPD wearable with its LED blinking orange gently

👀 Behavior: Orange LED blinks gently

💡 Meaning: The battery is low. Please charge the WellPD wearable as soon as possible. This notification appears when the device reaches approximately 5% battery level. On a full charge, the battery can last up to 14 days, depending on usage.

🔵🟠 Blue and Orange LED (blinking) – Bluetooth Error
	👀 Behavior: Blue and orange LED blink 💡 Meaning: There is a Bluetooth connection issue. The WellPD wearable is still recording data. Open the WellPD App to reconnect the device. For detailed troubleshooting steps, please refer to our Bluetooth disconnection support article here: Bluetooth disconnections between the WellPD wearable and the WellPD App

🔵🟠 Blue and Orange LED (blinking) – Bluetooth Error

The WellPD wearable with its LED blinking blue and orange

👀 Behavior: Blue and orange LED blink

💡 Meaning: There is a Bluetooth connection issue. The WellPD wearable is still recording data. Open the WellPD App to reconnect the device.

For detailed troubleshooting steps, please refer to our Bluetooth disconnection support article here: Bluetooth disconnections between the WellPD wearable and the WellPD App

🟠⚡ Orange LED (fast blinking) – Device Error
	👀 Behavior: Orange LED blinks quickly 💡 Meaning: A device error has been detected and it is not collecting data. This status may indicate that the device memory is full or that it has stopped recording. Please open the WellPD App to review the device status and follow the on-screen instructions. For guidance on resolving a full memory issue, refer to the troubleshooting article available here: WellPD wearable memory full

🟠⚡ Orange LED (fast blinking) – Device Error

The WellPD wearable with its LED blinking orange quickly

👀 Behavior: Orange LED blinks quickly

💡 Meaning: A device error has been detected and it is not collecting data. This status may indicate that the device memory is full or that it has stopped recording. Please open the WellPD App to review the device status and follow the on-screen instructions.

For guidance on resolving a full memory issue, refer to the troubleshooting article available here: WellPD wearable memory full

⚫ No LED when pressing the button – Battery Depleted
	👀 Behavior: When pressing the button, no LED lights appear. 💡 Meaning: This indicates that the device battery is fully depleted. The device needs to be placed on the charger before it can resume normal operation. For detailed instructions on how to properly charge the device, please refer to this article: WellPD wearable is not charging

⚫ No LED when pressing the button – Battery Depleted

👀 Behavior: When pressing the button, no LED lights appear.

💡 Meaning: This indicates that the device battery is fully depleted. The device needs to be placed on the charger before it can resume normal operation.

For detailed instructions on how to properly charge the device, please refer to this article: WellPD wearable is not charging

LED Guide When Device Is in the Charger

⚪ White LED (blinking) – Charging in Progress
	👀 Behavior: White LED blinks. 💡 Meaning: The device is correctly placed in the charger and charging is in progress. Please be aware that the LED light will turn off when charging is complete.

⚪ White LED (blinking) – Charging in Progress

The WellPD wearable with its LED blinking white while charging

👀 Behavior: White LED blinks.

💡 Meaning: The device is correctly placed in the charger and charging is in progress.

Please be aware that the LED light will turn off when charging is complete.

⚫ No LED while in the charger – Battery Fully Charged
	👀 Behavior: After being placed in the charger for some time, no LED lights appear. 💡 Meaning: The device is fully charged.

⚫ No LED while in the charger – Battery Fully Charged

The WellPD wearable on the charger with no LED light

👀 Behavior: After being placed in the charger for some time, no LED lights appear.

💡 Meaning: The device is fully charged.